| 防腐地坪漆涂刷后起泡现象主要是因为两个因素 |
| 添加时间：2019/7/25 14:09:39 浏览次数： |
| 防腐地坪漆工程中，涂刷后漆膜起泡现象是最常见的一个问题，防腐地坪漆涂刷后起泡现象主要是因为两个因素：1、在涂刷前对附着物表面清理不到位留有杂质、水分。2、是涂刷工具未能及时清理涂刷不够均匀留有空隙。 In the anti-corrosive floor paint engineering, the blistering phenomenon of paint film after painting is the most common problem. The blistering phenomenon of anti-corrosive floor paint after painting is mainly due to two factors: 1. There are impurities and moisture left on the adherent surface before painting. 2. The tool fails to clean up the gap in time. 解决方法：要修复，地坪漆需要从表面上完全剥离，然后再重新粉刷锁住水分完全干燥。推荐阅读：导致防腐地坪漆光泽度下降原因有哪些呢。 Solution: To repair, the floor paint needs to be completely peeled off the surface, and then re-painted to lock in moisture and completely dry. Recommended reading: What causes the gloss of anti-corrosive floor paint to decline? |
| 上一页 环氧自流平地坪漆标准工艺厚度在1.5mm左右 |
| 下一页 环氧平涂面漆用滚筒滚涂 |
Copyright © 技术支持：遨游网络