| 环氧树脂玻纤防腐地坪施工工艺 |
| 添加时间：2019/2/27 16:08:31 浏览次数： |
| ①防水处理：一楼地面需已做好防水处理； Waterproofing treatment: First floor should be waterproofed; ②素地处理：依素地状况做好打磨、修补、除尘； (2) Plain treatment: grinding, repairing and dust removal according to the condition of plain land; ③环氧底漆：环氧底漆，采用渗透性及附着力特强环氧底漆滚涂一道，增强与素地附着力； (3) Epoxy primer: epoxy primer, which is rolled together with epoxy primer with strong penetration and adhesion to enhance the adhesion with plain ground; ④铺玻纤布：将玻织布放置平整，用调配好的环氧中涂将玻织布粘附地面，并用批刀将环氧中涂批平，使其均匀涂布，增强地面坚韧性，依需要做一至三层； (4) Laying glass fibre cloth: placing glass fabric flat, using prepared epoxy coating to adhere to the www.yanglaoyuant.com.cnwww.diandongment.com.cnwww.taiyuanbanjia.com.cnwww.gonglujiemuju.cn www.turangxiufuu.cnwww.yanglaoyuand.cnground, and using batch knife to smooth the epoxy coating to make it uniformly coated, enhance the ground toughness, and make one to three layers as needed; ⑤环氧中涂：将环氧树脂加入适量的石英砂，用镘刀将其均匀涂布一至三道；Epoxy coating: epoxy resin is added to a proper amount of quartz sand and evenly coated with a trowel for one to three passes. ⑥环氧批土：依实际需要施工二至三道，要求达到平整无孔洞、以利面涂施工； Epoxy batch soil: according to actual needs, construction of two to three roads, requirements to achieve flat without holes, in order to facilitate surface coating construction; ⑦面涂层：环氧自流平面漆用镘刀镘涂，环氧平涂面漆用滚筒滚涂，完工后整体地面光亮洁净、颜色均一、无空鼓。 _Surface coating: epoxy self-flow surface paint is coated with trowel, epoxy surface paint is rolled with roller, after completion, the whole ground is bright and clean, uniform color, no empty drum. |
| 上一页 环氧树脂 |
| 下一页 环氧地坪漆施工工艺详细流程！ |
Copyright © 技术支持：遨游网络