济南通风管道诚信加工厂

在防腐地坪的施工过程，稍不注意，就会出现一些问题，严重影响防腐地坪的使用性能以及使用寿命。

In the construction process of the anticorrosion floor, some problems will appear, which will seriously affect the performance and service life of the anticorrosion floor.

下面我们来分析一下最常出现的四大纰漏以及解决措施。

Let's analyze the four most common mistakes and solutions.

1、地坪表面有明显的坠流现象

1. The surface of the floor has obvious falling.

Solutions

2, grinding is not in place, after painting the floor lacquer, there is a crack.

Solution

3. The phenomenon of delamination and shedding of anticorrosive floor lacquer

如果因腻子强度达不到，或腻子与原墙粘结不牢固，或腻子本身空鼓，待刷漆后由于腻子易吸收漆内水分，使得腻子容易脱层、甚至脱落。

If the strength is not up to the putty, putty or bond with the original wall is not solid, or to paint putty itself hollowing, putty, paint due to absorption of moisture, the putty easy delamination, or even fall off.

解决措施

Solutions

一是在施工前建议大家做好刷漆前的检查工作。二是出现脱落现象，应立刻重新涂刷。

First, before the construction of the proposal to do a good job before the paint inspection. Two is the phenomenon of falling off, it should be immediately re painted.