| 防腐工程地坪怎么施工 |
| 添加时间：2019/6/19 16:31:10 浏览次数： |
| 施工工艺： Construction technology: 1、地面处理 : 依据地面状况做好打磨、修补、除污、除尘； 1. Ground treatment: grinding, repairing, decontamination and dust removal according to the ground condition; 2、环氧底漆 ：采用渗透性及附着力特强底漆滚涂一道，增强表面附着力； 2. Epoxy primer: Roll one primer with strong penetration and adhesion to enhance surface adhesion; 3、玻纤铺设 ：用玻纤布全面铺设一道； 3. Fiberglass Laying: Laying one piece of fiberglass cloth in an all-round way; 4、环氧砂浆 ：将环氧双组份加入石英砂，用镘刀将其均匀涂布多道； 4. Epoxy mortar: Epoxy double component is added to quartz sand and uniformly coated with a trowel knife. 5、环氧腻子 ：用环氧双组份加入适量腻子粉，用镘刀将其均匀涂布多道； 5. Epoxy putty: adding proper amount of putty powder with epoxy two-component, evenly coating it with trowel knife for multi-channel; 6、重防腐面漆:用重防腐面漆滚涂二至三道； 6. Heavy-duty anti-corrosive topcoat: Roll two or three coatings with heavy-duty anti-corrosive topcoat; 7、地坪投入使用时间：以250C为准，24小时后方可上人，72小时后方可重压,气温较低时，间隔时间需适度延长。 7. The time when the floor is put into use: 250C, 24 hours later, and 72 hours later, the pressure can be heavy. When the temperature is low, the interval time should be prolonged moderately. |
| 上一页 环氧树脂地坪用于家庭存在几方面问题 |
| 下一页 环氧树脂防腐地坪地板厚度为2.0~5.0mm |
Copyright © 技术支持：遨游网络