| 地坪选择方法 |
| 添加时间：2019/1/3 14:24:15 浏览次数： |
| 机械性能要求 Mechanical Performance Requirements 主要以下三个方面： There are three main aspects: 1、耐磨性：地坪在使用时会有哪些车辆行走？ 1. Wear resistance: Which vehicles will walk on the floor when it is used? 2、耐压性：地坪在使用时会承受多大荷载？ 2. Pressure Resistance: How much load will the floor bear in use? 3、耐冲击性：冲击力是否会引起地坪面起壳、剥离？ 3. Impact Resistance: Will the impact force cause shelling and peeling of the floor? 化学性能要求 Chemical performance requirements 主要考虑以下两个方面： Consider the following two aspects: 1、耐酸碱性：使用时腐蚀性化学物质的种类及浓度。 1. Resistance to acid and alkali: The kinds and concentration of corrosive chemicals when used. 2、耐溶剂性：使用时溶剂类型及接触时间。 2. Solvent resistance: Solvent type and contact time when used. 楼层位置状况（防水、防潮） Floor Location Status (Waterproof, Moisture-proof) 根据地坪是在地下楼层还是地面楼层的位置，确定是否需要防潮处理或选择特殊防潮地坪？ According to the location of the floor in the underground floor or the ground floor, is it necessary to select a special moistureproof or moistureproof? 基面状况 Base level condition 1、基层强度：标号C25及以上，一般要求抗压强度≥20Mpa； 1. Grass-roots strength: label C25 or above, generally required compressive strength (> 20Mpa); 2、平整度：是否需要用环氧砂浆修补？ 2. Flatness: Is it necessary to repair with epoxy mortar? 美观要求 Aesthetic requirements 1、颜色要求：是否需要颜色划分区域？ 1. Color Requirements: Do you need color zoning? 2、亮度要求：是选择哑光还是亮光？ 2. Brightness requirement: matte light or bright light? 3、平整度要求：是否对地坪的平整度有要求？ 3. Flatness Requirements: Are there any requirements for the flatness of the floor? 安全性要求 Safety requirements 如果地坪处在油渍环境或坡道处，则需要选择环氧防腐地坪、环氧防滑地坪。 If the floor is located in oil-stained environment or ramp, epoxy anti-corrosion floor and epoxy anti-skid floor are needed. |
| 上一页 透水地坪施工步骤 |
| 下一页 地坪用途 |
Copyright © 技术支持：遨游网络