厂房内部地坪做法:
Floor practice in the plant:
（1）去除地面原有地坪涂料至面砖基层；
(1) remove the original floor coating from the ground to the surface brick base;
（2）原有破损、开裂、空鼓的面砖及砖缝基层采用聚合物水泥砂浆重新修复、找平；
(2) the original damaged, cracked and hollowed surface bricks and brick joint base course shall be repaired and leveled with polymer cement mortar;
（3）对基层打磨，清理基层表面垃圾，吹去浮灰；
(3) polish the base course, clean up the garbage on the surface of the base course and blow away the floating ash;
（4）基层表面涂刷瓷片环氧渗透型底漆一遍；
(4) brush one coat of epoxy penetrating primer on the surface of base course;
（5）地坪环氧砂浆厚度2mm；
(5) the thickness of epoxy mortar on the floor is 2mm;
（6）高固环氧底漆上部压入防腐波纤网一层，加强防腐耐压能力；
(6) press a layer of anti-corrosion wave fiber net into the upper part of high solid epoxy primer to strengthen the anti-corrosion and pressure resistance capacity;
（7）地坪环氧砂浆厚度2mm；
(7) the thickness of epoxy mortar on the floor is 2mm;
（8）地坪腻子找平厚度1mm；
(8) the leveling thickness of the floor putty is 1mm;
（9）面层涂刷高固含环氧地坪面漆（亮光型）两遍。
(9) the surface course shall be applied with two coats of high solid epoxy floor finish (bright type).