防腐地坪漆涂刷后起泡现象主要是因为两个因素：1、在涂刷前对附着物表面清理不到位留有杂质、水分。2、是涂刷工具未能及时清理涂刷不够均匀留有空隙。解决方法：要修复，地坪漆需要从表面上完全剥离，然后再重新粉刷锁住水分完全干燥。推荐阅读：导致防腐地坪漆光泽度下降原因有哪些呢。 [1]
The phenomenon of blistering after anticorrosive floor paint is mainly due to two factors: 1. 2, the brushing tool failed to clean up in time. Solution: to repair, the floor paint needs to be completely stripped from the surface and then repainted to lock the water completely dry. Recommended reading: what causes the gloss degradation of antiseptic floor paint? [1]
环防腐地坪的施工十分重要，只有根据厂房所处的环境条件，设计科学合理的防腐蚀方案，选用优质的重防腐地坪漆品种，并确保施工质量，做好使用维护，才可能取得较好的防腐蚀效果。
The construction of the ring anticorrosion floor is very important. Only according to the environmental conditions of the factory, the design of a scientific and reasonable Anticorrosion Scheme, the selection of high quality and heavy anticorrosion floor lacquer varieties, the quality of construction and the good use and maintenance, can a better anti-corrosion effect be obtained.
防腐地坪漆为三组份漆，适合防腐罐、重型机械表面处理及化工企业易腐蚀区域的地坪，石油工业的防腐工程及污水池化学池等。抗渗透性强，耐强酸、碱、盐及各种有机溶剂，表面硬度高，致密性好。本漆分为A、B两组份，其中A组为环氧胺类固化剂，B组为环氧色漆、玻璃粉组成。该漆耐强酸碱、耐海水、盐雾及各类化学介质腐蚀、附着力强、耐磨、耐冲击、防尘等。主要适用于化工厂、输送管道、电镀厂、海洋设备等涂装。
Anticorrosion floor lacquer is three sets of paint, suitable for anticorrosion tank, heavy machinery surface treatment and ground floor of chemical enterprise which is easy to corrode area, anticorrosion engineering of petroleum industry and chemical pool of sewage pond, etc. It has strong resistance to penetration, strong acid, alkali, salt and various organic solvents. The surface hardness is high and the compactness is good. The lacquer is divided into two parts: A and B, of which A is epoxy amine curing agent, and B group is made of epoxy paint and glass powder. The paint is resistant to strong acid and alkali, seawater, salt fog and various chemical media, strong adhesion, abrasion resistance, impact resistance and dustproof. It is mainly applied to chemical plant, transportation pipeline, electroplating plant, marine equipment and so on.